BMRQX - QUICK DRY ENAMEL SAFETY GREEN, 54-311

  • MSDS: BMRQX
  • Manufacturer: PPG INDUSTRIES INC
  • Product Name: QUICK DRY ENAMEL SAFETY GREEN, 54-311
  • National Stock Number: 8010-00N026382
Product Identification

Product ID:QUICK DRY ENAMEL SAFETY GREEN, 54-311
MSDS Date:08/14/1989
FSC:8010
NIIN:00N026382
MSDS Number: BMRQX

Responsible Party
PPG INDUSTRIES INC
260 KAPPA DR
PITTSBURGH, PA 15238
US

Emergency Phone: 304-843-1300

Info Phone: 412-963-5822

Cage: 47695

Contractor
PPG INDUSTRIES INC
PITTSBURGH, PA 15272 US

Telephone: 1-800-245-2974 (CAL HYPO)

Cage: 47695

Ingredients

57.19 (WT)

RTECS: 9999999ZZ


TITANIUM OXIDE; (TITANIUM DIOXIDE)

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 2-5%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293


ALUMINUM SILICATE

CAS: 1335-30-4

Fraction By Weight: 5-10%


NAPHTHA, MEDIUM ALIPHATIC

CAS: 64742-88-7

Fraction By Weight: 25-30%


HYDROTREATED HEAVY NAPHTHA

CAS: 64742-48-9

Fraction By Weight: 10-15%


FILM FORMERS, RESINS, AND ADDITIVES

Fraction By Weight: 40-45%


THERE IS NO SIGNIFICANT HAZ FOR MAN. EYE

RTECS: 9999999ZZ


LEVELS ARE TOO HIGH. RED/ITCH/BURN SENSATION & VISUAL

RTECS: 9999999ZZ


BURN/RED & SWELL ARE CONDITIONS ASSOCIATED WITH

RTECS: 9999999ZZ


IN EXCESS OF FEW INCHES.

RTECS: 9999999ZZ


TYPE OF AIRBORNE CONTAM AGAINST WHICH RESPIRATORY

RTECS: 9999999ZZ


EXPO LIM, LEL IN INGRED BELOW STATED LIM, & TO REMOVE

RTECS: 9999999ZZ


PRODUCT.

RTECS: 9999999ZZ


CLEAN OR DISCARD CONTAMINATED CLOTHING

RTECS: 9999999ZZ

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:INGEST:HARMFUL/FATAL IF
SWALLOWED. EYE:CAUSES IRRIT. SKIN:MAY CAUSE MOD IRRIT.
INHAL:VAP/SPRAY MIST MAY BE HARMFUL IF INHALED. VAP IRRITATES
EYES/NOSE/THROAT. RPTD EXPOS TO HIGH VAP CONC MAY CAU SE IRRIT OF
RESP SYS & PERM BRAIN & NERV SYS DAM. INTENTIONAL MISUSE BY DELIB
CONC & INHALING CONTENTS (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ:CAN BE HARMFUL/FATAL. CHRONIC:AVOID
LONG TERM & RPTD CONT. PROD CNTNS TITANIUM DIOXIDE. ANIMALS
INHALING MASSIVE QTY OF TITANIUM DIOXIDE DUST IN LONG-TERM STUDY
DEVELOPED LUNG TUMORS. STUDIES W/HUMANS INVOLVED IN MFR OF PIGMENT
INDICATE NO INCR RISK OF CANCER FROM EXPOS. POTNTL FOR INHAL OF
TITANIUM(SUPP DATA)

First Aid

First Aid:INGEST:DO NOT INDUCE VOMIT. EYE:FLUSH IMMED WITH PLENTY OF
WATER FOR AT LEAST 15 MIN. SKIN: REMOVE PROMPTLY BY WIPING,
FOLLOWED BY WATERLESS HAND CLEANER AND SOAP AND WATER. INHAL:REMOVE
TO FRESH AIR. APPLY ARTF RESP & OTHER SUPPORTIVE MEASURES AS REQ.
IF ANY OF FOLLOW OCCUR DURING/FOLLOW USE OF PROD, CONT POIS CTRL
CTR, EMER ROOM/PHYS IMMED; HAVE MATL SFTY DATA SHEET INFO
AVAILABLE.

Fire Fighting

Flash Point Method:PMCC
Flash Point:112F,44C
Lower Limits:0.9%
Extinguishing Media:USE NATL FIRE PROT ASSOC (NFPA) CLASS B EXTING
(CO*2/DRY CHEM/UNIVERSAL AQUEOUS FILM FORM FOAM) DESIGNED TO (SUPP
DATA)
Fire Fighting Procedures:NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP. H*2O
SPRAY MAY BE INEFT. H*2O SPRAY MAY BE USED TO COOL CLSD CONTR TO
PVNT PRESS BUILDUP & POSS (SUPP DATA)
Unusual Fire/Explosion Hazard:KEEP CONTR TIGHTLY CLSD. ISOLATE FROM
HEAT/ELEC EQUIP/SPARKS/OPEN FLAMES. CLSD CONTR MAY EXPLODE WHEN
EXPOS TO EXTREME HEAT. DO NOT APPLY TO HOT (SUPP DATA)

Accidental Release

Spill Release Procedures:PROVIDE MAX VENT. ONLY PERS EQUIPPED W/PROPER
RESP & SKIN & EYE PROT SHOULD BE PERMITTED IN AREA. REMOVE ALL
SOURCES OF IGNIT. TAKE UP SPILLED MATLS/SAWDUST/VERMICULITE/OTHER
ABSORB MATL & PLACE INTO CONTAINER FOR DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:DO NOT STORE ABOVE 120F. STORE LG QTY
IN BUILDINGS DESIGNED & PROTECTED FOR STORAGE OF NFPA CLASS II
COMBUSTIBLE LIQUIDS.
Other Precautions:IF MATL IS PART OF MULTIPLE COMPONENT COAT SYSTEM,
READ MATL SFTY DATA SHEET(S) FOR OTHER COMPONENT/COMPONENTS BEFORE
BLEND AS RSLTG MIX MAY HAVE HAZ OF ALL OF ITS PARTS. CONTR SHOULD
BE GROUND WHEN P OUR. AVOID FREE FALL OF LIQ (ING 9)

Exposure Controls

Respiratory Protection:OVEREXP TO VAP MAY BE PVNTD BY ENSURING VENT
CTRLS, VAP EXHAUST/FRESH AIR ENTRY. NIOSH/MSHA APPRVD (TC-23C-)
PAINT SPRAY/AIR SUPPLIED (TC-19C) RESP MAY ALSO REDUCE EXPOS. READ
RESP MFR INSTRUCTIONS & LITEARTURE CAREFULLY TO DETERM (ING 10)
Ventilation:PROVIDE GEN DILUTION/LOC EXHAUST VENT IN VOL & PATTERN TO
KEEP CONC OF INGRED LISTED BELOW LOWEST SUGGESTED (ING 11)
Protective Gloves:IMPERMEABLE GLOVES.
Eye Protection:CHEM WORK GOG OR FULL LNGTH FSHLD.
Other Protective Equipment:IMPERMEABLE APRONS CONSTRUCTED OF: POLYVINYL
ALCOHOL, NEOPRENE RUBBER, NITRILE RUBBERBUTYL RUBBER/LATEX RUBBER.
(ING 13)
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
EXTING MEDIA:EXTING NFPA CLASS II COMBUST LIQ FIRES. EXPLO HAZ:SURF.
TOX GASES MAY FORM WHEN PROD IS CONTACTED BY FLAME/HOT SURF. FIRE
FIGHT PROC:AUTOIGNIT/EXPLO WHEN EXPOS TO EXTREME HEAT. IF H*2O IS
USED, FOG NOZZLES ARE PREF. EFTS OF OVEREXP:DIOXIDE DUSTS FROM COAT
IS VERY LIM. SINCE OVEREXP IS NOT EXPECTED, (ING 6)

Chemical Properties

HCC:F4
Boiling Pt:B.P. Text:277F,136C
Vapor Pres:1.7
Vapor Density:HVR/AIR
Spec Gravity:1.00
Evaporation Rate & Reference:17(BUAC=100)
Solubility in Water:0.0%
Appearance and Odor:VISCOUS LIQUID W/AN ODOR CHARACTERISTIC OF SOLV IN
INGREDIENTS
Percent Volatiles by Volume:ING 14

Stability

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG ALKALIES, STRONG MINERAL ACIDS, OR STRONG
OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:MAY PRODUCE HAZ DECOMP PROD WHEN
HEATED. WELD/BRAZ/FLAME-CUT ON SURF COATED WITH PROD MAY PRODUCE
FUMES INCL CO.

Disposal

Waste Disposal Methods:WASTE MATERIAL MUST BE DISPOSED OF IN ACCORDANCE
WITH FEDERAL, STATE, PROVINCIAL, AND LOCAL ENVIRONMENTAL CONTROL
REGULATIONS. EMPTY CONTAINERS SHOULD BE RECYCLED OR DISPOSED OF
THROUGH AN APPROVED WA STE MANAGEMENT FACILITY.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.